check the fuse box
locate unlock code on a 95 ford windstar
no it did not
Check the door sensors that a common source of false door ajar warnings/signals. See "Related Questions" below for much more about fixing this problem.
electronic module
On a 1996 Ford Windstar : Open the drivers door and on the latch pillar ( or the end of the door ) you will see an information sticker . One of the things it shows is the tire size on the vehicle from the factory
I would advise against it.
On a 2001 Ford Windstar : The liftgate is the big door at the rear of the vehicle that opens by going up
On a 2002 Ford Windstar : Open the drivers door and on the latch pillar will be an information sticker that shows the original size of tires on the vehicle from the factory
On a 2000 Ford Windstar : Open the drivers door , and on the latch pillar will be an information sticker that shows the original size of tires on the vehicle from the factory
On a 2000 Ford Windstar : Open the drivers door and on the latch pillar you will see an information sticker . One of the things it shows is the original size of tires on the vehicle from the factory
The most common problem with heat and a/c in the Ford Windstar is Blend Door failure. The Blend Door actuator on the Ford Windstar can be found by removing the glovebox. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair. Linked here is a video from www.heatertreater.net demonstrating how to access components of the plenum box for repair without disassembling the entire dash.
Ford was rather late in the mini-van game when they added the second sliding door in 1999, and continued it to the end of the Windstar name in 2003. Trivia Tidbit: The successor to the Windstar name was the "Freestar" and coincided with the introduction of the twin Mercury Monterey. I do not believe any single side door Windstar was offered after 1998.