0
What causes multiple cylinder misfires on dodge 5.9l engine with only 11000 miles on rebuilt motor from dealership?
Wiki User
∙ 17y ago
the injectors....
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Do you have to bench bleed a rebuilt master cylinder?
Yes, new or rebuilt makes no difference.
How much is a 6 cylinder engine for a 2000 Chevy S10?
New? Rebuilt? Used?
Is it better to get new or rebuilt engine cylinder heads?
If the only thing wrong with the engine is the cylinder heads, yes you should replace just them, Getting a rebuilt motor is expensive and not needed unless the motor has been damaged beyond repair.
How much does it cost to put in a rebuilt transmission on a 1991 Eddie Bauer ford explorer?
My transmission change through the Ford dealership was about $2800.
What does it mean when there is fluid dripping from the master cylinder and the petal goes all the way to the floor?
It means your master cylinder needs to be replaced or rebuilt. The seals inside the cylinder can go bad and cause this to happen.
Why did my brake pedal on my 1999 grand am go right to the floor and when I changed the master cylinder it bled the whole system and I have no leaks what should I do?
Get someone to help you and bleed the brakes again. You should have bench bled the master cylinder before installing. Start at the right rear, then go to the left rear, right front, and end at the left front brake. Bleed each caliber until you see no more air escaping. If you do not know how to bleed your brakes a Google search will give you instructions. If you do it right, assuming the Master Cylinder is good, you will have good brakes. I have seen rebuilt master cylinders that were defective out of the box. If you bought a rebuilt master cylinder, I would recommend you return it and get a new master cylinder. Rebuilt products today are not rebuilt in the U.S. and it is common for them to be defective. Buy new!
Where can one find rebuilt diesel engines for sale?
You can find rebuilt diesel engines for sale at local garage sales. You can also go to the car dealership to see if they have anything that they will not need. Also, visit the local mechanic to see if there are scrapped parts they are willing to sell you.
What is the Firing Order for 1950 GMC 228 cu-in 6 cylinder?
I rebuilt one 25 years ago. Its 153624.
Your rear break drum is leaking fluid Dodge Dakota?
your wheel cylinder is leaking,you will need to buy a rebuilt or new whl cylinder also new brake shoes and a can of brake cleaner.
What is the procedure for tightening the automatic transmission bands on a 1995 4-cylinder Metro?
It isn't possible. You'll need to have the transmission rebuilt.
How do you repair a leak in a master or slave cylinder for 2002 alero?
The best thing to do is replace it with A new or rebuilt unit. This is how you determine witch part is bad, If you are losing fluid its likely the slave cylinder, If the fluid is still there but the clutch is not working then its likely the master cylinder.
Can you repair a cracked cylinder head without removing?
No - this must be benched and rebuilt. We're not talking about a little leak that can be repaired with duct tape.
