Did you ever get an answers to this question? I have a 1990 740 GL with the same problem?
Thanks
Engine Coolant Temp. sensor ECT (#1346030), sensor for the ECU, not the sensor for the temp gage, I recommend BOSCH
Look under the intake close cylinder #3
Broken valve spring
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
On the 96-2004, you will have to drop the valve body...
The Thermostat and Temp and Press Valve is faulty and needs to be replaced. or the PRV (pressure reducing valve) is dirty and must be replaced
The PCV valve on a 2004 Volvo S40 is located on the engine crankcase. It is a small rubber valve.
Usally that is an indication that the valve seals need replaced.
Valve clearance of Volvo f12, are set using a feeler gauge on the lash adjuster.
valve seals. Can be replaced with engine in truck & heads do not have to be removed.
For valve clearance of Volvo d13a one needs to remove and re install injector cups.
The idle air control valve on a Volvo S80 is located on the intake manifold. The valve controls the rate at which the engine holds an idle.
my 2002 volvo s-40 is miss firing and it is alleged that the fault is from the idle air control valve. how can i clean the valve?
Not 100% sure about the '87, but there is no PCV valve on the 1986 Volvo 240 2.3L. Flame trap and Oil trap, but no PCV.