make one! easier, cheaper, and just as effective! i used 4" abs pipe, rubber elbows and a k and n filter, total cost $70, sounds wicked and works just as good! i sanded my pipe lightly and colour matched it to the truck, but without that process it takes about 20 min! well worth it!
You will not damage your engine if you remove its cold air intake. The cold air intake system is merely added to increase engine efficiency and performance.
there is a ton of stuff to do, computer chip, cold air intake, exhaust, or a new camshaft, bore the engine bigger, intake manifold, throttle body spacer, tons of stuff......
I would recommend putting a cold air intake in your es.
A cold air intake is an aftermarket part used to help open air flow to the engine. The cold air intake sucks up cold air from underneath the car and is attached to your intake manifold. So it is a pipe going from somewhere close to the bottom of the engine compartment leading to your intake manifold.
Does it only occur when the engine is cold? There should be an idle valve with a vacuum hose i.e. BMW has a hose that comes from the intake manifold goes down into an electric valve then goes on to the throttle body intake hose. The timing is retarded to help start/idle the engine when it's cold if the hose came loose it will not advance the ignition when the engine is warm.
Cold air intake is better because it's denser.
The Volant Cold Air Intake Kit is used to increase cool airflow for engine performance. Cold air intake kits were specifically made for maximum engine performance and fuel efficiency.
If you mean cold air intake or cold air induction (CAI), the answer is no. A cold air intake system is simply a more free flowing air intake. The intake tubing is less restrictive, and often draws air in away from engine heat, hence the name cold air intake. This could be lower in the engine compartment by the fenderwall usually. A cold air intake will ultimately make the engine run slightly cooler. A cooler engine is less destructive to the various components. So CAI will not shorten the life of your engine when properly researched, installed and used.
Cold air intake kits are used for bringing relatively cool air into a car's internal - combustion engine. Cold air intake kits are also marketed with claims of increased engine efficiency and performance.
A cold air intake brings air into the engine. It usually consists of a plastic tube with a air filter on the end.
When the engine is hot .008 intake .012 exhaust or .007 intake .011 exhaust When the engine is cold
Yes, many vehicle manufacturers make a cold air intake. For a 1993 Ford Ranger 3.0, a person should place an order with the Ford company.?æ