dont remember the color exactly, but if the factory harness is still there, the clip side that you push in to remove the harness is positive
Remove the speaker covers from your 1997 Mercury. Remove the door speaker retaining screws. Remove the door speaker wiring harness. Reverse the process to install your new door speakers.
You will need to remove the rear door speaker covers. The Chevrolet blazer speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the speaker wiring harness.
Remove the door speaker cover. The cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.
well if you have the door off already then take a Philips head screwdriver and romove the speaker if you put a new speaker in try to roll down your window all the way first before instaling the door pannel. you might need the spacer to bring it out alittle. i just cut the factory harness and splied in the corect harness
The speaker wires have 2 pin connectors that connect to the coaxial speakers in the doors.. If looking to upgrade speakers make sure you do research on the physical size of the new speaker as there might be issues. Also you can pick up a wire harness to connect the factory wire harness that is mounted to the door to a new set of speakers.
You do not need to remove the door panel to change your speakers. Remove the speaker cover, by prying outward on the speaker cover retaining clips. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
The 1999 Pontiac Grand Am speakers can be removed by removing the speaker cover. The speaker cover is held in place with two screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
green and grey for rear door speakers and purple and grey for front door speakers
Open The Door, Remove The Door Panel, Remove Speaker, Wire The New Speaker, Fix The Speaker To The Door, Refix Door Panel, Switch On
The left speaker wire (+) is dark green, and the left speaker wire (-) is brown/red in the door of a 1997 Dodge Ram. For the right speaker, the right speaker wire (+) is purple, and the right speaker wire (-) is dark blue/red.
Fix the wiring harness between the body and the door, then in 10 months do the other side!!
first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.
Gently pry up on the speaker cover with a small screwdriver or knife. There are screws under the cover to remove the speaker, unplug harness and its free.
the factory installs a speaker harness which you can buy from your local audio/video shop and solder the neg- and pos+ on the speaker and just connect them. or you can cut the speaker harness off and solder straight the two neg and pos right on the speaker ans there ya go.. but if you have manual windows you'll have to remove the slip to get in the door and the rear deck just snaps off if you move ur hand along it
Passenger dash and door speaker is not working?
5 1/4 inch but they are factory speakers and require the Nissan factory harness to snap in for power!
AnswerTry to buy ford speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon
2010 Toyota corrolla door speaker sizes
You will need to remove the speaker covers in your 2006 Chevrolet Silverado. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
www.installdr.com all diagrams of cars and color code information
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.
Type your answer her I dont have an illustration, but i have installed power windows in my 88 240 wagon. The harness from the master control on the drivers door goes through the rubber boot and under the drivers side dash. There is a harness that goes from under the drivers side dash across to the passenger side dash. Then the harness for the passengers side window goes through the rubber boot on the passengers side door and connects to the harness under the passengers side. For the back windows...the harness connects to the main harness under the drivers side dash goes under the carpet to the back seat on the drivers side. That part then connects and goes through the "B" pillar and through the rubber boot to the back door on the drivers side. The main harness to the back then crosses over under the carpet over the driveshaft hump in the floor just under the parking brake cover. It crosses over to the back door on the passengers side. Front there it connects to the back door on the passenger side, going through the "B" pillar and through the rubber boot in the door. the front seats and carpet do need to come out to do this, as well as the parking brake cover. I installed the whole works in my car in about 2 hrs..including iinstalling the window motors and connecting the glass to them. with patients it is a great conversion to the old crank windows. any other questions email me at email@example.com e...
Door speaker size. 6 X 9
door 6.5 rear 6.5