0
What could be the problem if you changed the starter and the car still won't start?
Wiki User
∙ 14y ago
factory security system. bad key, bad ign lock cylinder, switch etc. Get a test light, and check if you have voltage to the starter in the "start position".
the runner is bad
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Could a fuse problem cause your 1999 Chrysler LHS not want to start?
When my 99 LHS wouldn't start I got my starter changed and the car started.
Why your 99 maxima will not start after you changed the starter?
If your '99 Maxima will not start even after you have changed the starter, you might have a dead battery or a bad starter solenoid. You could also have an empty gas tank.
I just Changed the starter and it just clicks when you try start it What is the matter?
The alternator might be the problem.
You have changed the clutch on your 95 escort and you still have to pop the clutch to start it?
The problem may be with your starter and not with the clutch.
Your 1993 Chevrolet truck wont start with starter but will push start what might be the problem?
The starter or battery could be weak. The weakness will cause the starter to turn too slowly to start the truck.
Your 1997 tracker will not start battery and alternator are ok what could be the problem?
check starter
What could be the problem when a car does not start?
power, ie battery, then starter, then spark, then fuel
What causes a fuse to the starter to break I have changed a couple of fuses. Now the care will not start. 2000 Dodge stratus?
The reason it blows out is because the starter shorts out the circuit. Replaceing the starter solves the problem
What could be wrong if a 1992 Plymouth Acclaim has power but will not start?
Your problem is prob the starter, if you hear grinding it def is, Tho if starter is good could be ignition relay
A 2000 alero won't start it doesn't even turn over but everything electrical works.have changed the starter what could be the problem?
You have a bad ignition relay switch. I had the same issue with a Mitsubishi galant.
I have replaced the starter on my 1991 S10 but it still won't start could it be a problem with the crank sensor?
Then why did you replace a perfectly good starter? ALWAYS test old parts and know what you're doing BEFORE you start throwing new parts at a problem. Find out WHY it isn't starting. Does the starter engage and turn the engine? IF it does, then the starter is probably fine. If not, check the starter, battery, electrical connections, ignition switch and neutral safety switch. If the starter has ALWAYS engaged and turned the engine, you should not have changed the starter in the first place; instead, you should be finding out what's wrong.
What eles would cause a 96 blazer not to start I changed the starter the starter relay and the neutral safety switch The problem is inertmittent?
Your 1996 Chevrolet Blazer may not start due to a faulty ignition switch. The electronic fuel pump may also be faulty and need to be changed.
