answersLogoWhite

0


Best Answer

The problem could be a number of things. One is that the new battery you installed is faulty and you would need a new battery. i would have a professional check your battery, starting and charging components on your car and make sure they are within spec. If they are all good then I would check for a battery draw on the car. This can be an extremely difficult and expensive problem to find; Suggest having certified BMW service done at this point. Make sure you have all aftermarket electrical stuff disconnected: no aftermarket radio, buzz detectors, nothing, not even anything in your cigarette lighter.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

If it starts with a jump, then it is obvious the problem is with the battery. Or, if it started with the new battery at first and then will not start later on without a jump, your alternator is defective.

If the battery is fully charged and the positive and negative cables are good, it's possible that the starter motor is bad.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What could be the problem on a 1993 730 BMW after you change the battery it still wont start without a jump?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why won't my 2003 VW Golf start without a jump start I disconnected battery now it won't start. Battery is good?

The battery seems to be a problem on this vehicle. A recharge could fix the issue but a new battery may be necessary.


If you changed the battery in a 1993 Dodge Intrepid 3.3 automatic and now it will not change gears what could be the problem?

check your alternator it might be bad.


Would a weak battery be the cause of a hesitation when turning on ignition?

Could be. But it might be an alternator problem instead of a batery problem. You need a good alternator to keep the bttery recharged. I wouldn't run out and buy a battery without getting the alternator checked.


Battery light was on and checked to see if it was the alternator and the alternator was bad have not fixed the alternator and now the battery light has not come back on what could be the problem?

There is no problem...the problem was the alternator. You have fixed the problem.


How do you fix charging alien battery problem in sony ericssion k510i?

replace the battery . it could be your battery is not genuine one . :)


Why does auto battery leak after charging?

An auto battery could be leaking for a couple of reasons. The alternator could be overcharging the battery causing the leakage. Or the battery itself could have a short or other internal problem causing it to leak when charging.


Why battery is removed first to change SIM card?

Because if not, you could remove the SIM without shutting down the phone, which can make it stop working. I managed to remove the SIM from an older Sagem phone without removing the battery and the phone just blocked. I had to remove the battery insert the SIM and put the battery back in order to restart it.


Is your phone broken if it wont turn on?

It could just have a dead battery. If the battery isn't the problem, probably so.


How do you charge a 7.2V Li-ion battery without using the specified battery charger?

There is no safe way to charge ANY battery without a charger rated for that particular battery. You could easily destroy the battery if you try.


Charge a car without a battery?

You can start a car without a battery if you hook up a jump pack or use jumper camples but it could fry your alternator. It is pointless to charge a car without a battery. When you charge the car you are charging the battery.


Can you replace 3.7V 600mAh battery with a 3.7V 2450mAh battery?

No problem if it's the same voltage, it will just last longer. But it might be significantly bigger, which could be a problem.


Could the problem be the alternator or voltage regulator if a battery won't hold a charge in a Mazda miata?

Could be a bad battery Check the chatging system with a voltmeter--a fully charged battery should read approx. 12.8 volts without engine running With engine running reading should be approx. 13.8-14.2 volts