0
What could be wrong if your 1996 Dodge Intrepid check engine light came on and it is stalling out when you accelerate if you have already changed the fuel filter?
Wiki User
∙ 18y ago
Start by reading the stored code. Use a code scanner to read the computer codes and you'll get a prety good idea of what's wrong.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
How do you change motor mounts on a 1999 Intrepid?
Greak site I asked this question some time ago , I have changed them out already with no help from this site .
Why does your 2005 hyundia not accelerate?
well they changed it and its not realy good
Changed the fuel pump on your 1993 Bonneville keeps stalling?
I have changed the fuel pump on my 1993 Pontic Bonneville, it still is stalling any clues why? could be Fuel Pressure Regulator http://www.youtube.com/watch?v=AKtR_yF7bi8&feature=related
What would make a Intrepid shut down?
Cam sensor. Changed mine no more problems.
What is wrong with a 2010 Nissan Altima if you already changed the fuel pump and still if you touch the gas more than the lightest touch and then let off it will die or almost die?
You should check the IAC valve and the MAF sensors both can cause stalling.
Your 94 Chevy pick sputters and jerks when you accelerate?
the fuel filter has been changed.
What indications does a car do when the fuel filter needs to be changed?
Hard to start, stalling, poor performance. Replace it an you will then know if it was needed.
Would a bad camshaft position sensor cause stalling and hesitation?
yes definitely my 96 Chevy was stalling every time i stopped at a light or stop sign and my brother changed my crank shaft sensor and it doesn't do it anymore.
What do you do next if your 1995 Intrepid fan runs all the time and you have already replaced the PCM and module and heat sensor?
Check the wiring for a short it has to be getting power from somewhere. Check swiches as well and remember that even new parts can be bad. you will need a multimeter for this task. I had the same problem with my intrepid. it was gone after i changed the thermostat, use a Mopar thermostat, these cars are designed for 196 degrees.
Why does your automatic locks pop up on your 1993 Dodge Intrepid after a couple of hours after you lock them?
The lock need to be changed
1994 Dodge Intrepid 3.3 cranks over but no spark?
I don't know what that problem is but if you find out what the problem is could you email me at odellk@wowway.com and let me know!! I have the same problem with my 1994 3.3l intrepid! I have a 1993 3.3l intrepid that's doing the exact same thing. I've had the crank sensor changed out, the cam sensor changed, checked all fuses and it's still doing it
Why does my 97 Subaru overheat but when you accelerate it cools off I already changed the thermostat 3 times and It has a brand new cooling system.?
has the water pump been changed. is the fan working correctly. sounds to me you are not getting enough cooler air through radiator. check the operation of the fan and that the radiator fins are not full of dirt and leaves
