A defective brake light switch could cause the problem. Also a defective turn signal switch could also. The brake lights work through the turn signals. It cancels the brake light so that the turn signal can work.
I would say no. My reasoning is that if incandescent bulbs have as much or more mercury than fluorescent bulbs, the fluorescent industry would be debunking all the reports of a mercury problem.Incandescent lights do not need or use mercury to operate, so there is none in them.Fluorescent lights cannot be made at all without mercury, as it is the glow of mercury ions that produces the UV light inside the fluorescent bulb to excite the phosphor coating to make visible light.
Many taillight assemblies are equipped with bulbs with dual filaments, one for tail lights and one for brake lights. If you have one bulb with two filaments, then the problem you describe sounds like the brake light filament in the left bulb is burned out but the tail light filament is working.
Neon. It's actually a sort of orangey-red and not a pure red. Pure red bulbs are probably fluorescent bulbs containing mercury vapor with tinted glass to make the light appear red.
Compact fluorescent light bulbs contain mercury. (For that reason, it is important to be very careful with a broken compact fluorescent bulb, because mercury is highly toxic.) Most other kinds of light bulbs do not contain any significant amount of mercury.
Bad bulbs Bad dimmer switch
check the switch at the break peddle
Check bulbs Check Fuse Check stop light switch
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
its on different bulbs
fuse, bulbs
you do not adjust the brake lights check the bulbs or check switch top of brake pedal.
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.
Type your answer here... Why are you wanting to rewire the brake lights?
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Check bulbs, fuses and brake switch in that order.