I have a 743 and use Delo 400 15-40 LE (light emissions) For some reason Delo seems to work best in all my diesels. Not sure on the amount of oil for the engine however...
where is the drain plug for hydraulic fluid on 743 bobcat
9 quarts
Bobcat Fluid part number 6563328 or 10w-30, 10w-40 Class SE motor oil. Use 5w-30 where temps are below -10F.
no, the oil is mixed with the gas before it goes in the carb, so there should never be oil sitting in the crankcase.
80w wet clutch
1/2 qt
crankcase oil is the oil in the engine .some call it crankcase oil some call it engine oil
no oil goes in the crank case, it uses lubrication from the 2cycle oil injected into the fuel that runs through the crank area
Yes. The oil drips into the crankcase via the oil filler location.
I have a 743 and love it...The Bobcat oil filter # is 3974896B you might be able to cross that number at Fram... I use NAPA Gold filer #1068... I have heard some bad stories on the Fram... the cross reference for the Fram I believe is PH43... NAPA lists the 1068 and 21068 as crosses for the Bobcat number..Here is the NAPA site to cross filers and they are great... I have never not gotten a hit... Do a bit of research on your own, dump Fram and go NAPA Gold... jim@cuab.net http://www.napafilters.com/filterlookup/index.asp
Crankcase oil is engine oil , so yes
the oil capacity for a bobcat 773 with oil filter is 7.5 quarts