Want this question answered?
One way to measure airspeed is to use a device called a pitot tube.
Do it the old school way and just let the car idle and adjust your CAS until you hear and knock and then go back the other way until you hear a ping, then do it until you hear nothing. Lock it down and be on your way.
The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
need to adjust high speed jet in carberator, turn in all the way then back out about 1 turn out and go from there.
How to adjust the idle speed If you have a carburetor, there is a crew on the driver side behind the throttle cable it usually has a spring on it if you turn it to the right it idles up left it idles down If its a fuel injected motor idle is handled by the computer. There usually is a "base idle speed" around 800-1000 RPM. This normally doesn't need to be adjusted. Have a look for carbon build up on the butterfly as well, this will influence idle too. u can also adjust the cable there's two nuts that hold the the cable to the injection adjust one way to lower and the other way to raise Also: check & tighten all hoses as even slightly leaking hoses raise & lower ur idle speed.
provides the easiest and securest way to share your high-speed Cable/xDSL Internet connection.
i just bought a cluster for a 1966 honda accord but now the speed is ten miles off is there a way to adjust it
He had to adjust the settings until it was working the way he wanted it to.
Its more of an bidirectional device......it shows u the output graphic data as well as helps u select ur option.........
== ==
Look on the carburetor on left or right side. On it, look for a gold/brass colored screw with a spring on it. Turn in and out to adjust the idle speed. Nothing can be damaged with this as the importent screw jet screws are out of way and not easy to get at.
What is the best way to change a device driver?