0
You need a 24v to 12v converter. Truck stops either keep them in stock or can get you one.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What do you need to use your 12 volt radio in your 24v truck?
You don't need anything. A 24v system is the cranking volts. The accessories are done for 12 volts.
Can you charge a 24V battery with a single 12V charger?
No, you need a 24 volt charger.
Can you use a 24v battery charger on a 36v battery?
No, you need a 36 volt charger.
How do you hook up 4 batteries in a diesel semi?
it depends on the truck some trucks are 24v starting some are 12 volt start
Can I replace three 8 volt batteries with two 12 volt deep cycle marine batteries in golf cart.?
it should work as long as the batteries are connected in series + to - what you would need to check is if the charger for the cart charges 24v or 8v if it is 8v you would need to get a 24v charger for it it would be possible to charge the batteries with a 12v charger but it would need to be hooked to each battery separately
How do you connect 3x12v solar panels to become 24v?
You don't. 2 12v panels together don't make 24v - doesn't work that way. If you need 24v you need to get 24v panels.
How do you tell the difference between 6 volt and 12 volt?
you can just check it properly... (on every battery volt is surely given...)
A truck semi uses 12v battery or 24v?
most semi truck in u.s.a. are 12 volt system. usually 4 12v batterys wire to get enough amps to crank engine. some older trucks were positive ground systems, most are now negative ground.
Will 24VAC be compatible with a 24 volt power supply?
yes it is compatible to use 24VAC to 24V supply
Can you use different amps on a 24V truck with 12V batteries in series?
y not?
How many lead acid cell batteries are needed for 48 volts?
Lead-Acid cells are generally considered to deliver 2 volts, so you'd need 24 cells to get 48 volt. Easiest way of doing that would be to use two 24V batteries as used in truck and heavy vehicles.
How do you connect a 12 volt winch to 24 volt system?
Connect the 12V winch to one battery, assuming the 24V system has two batteries, connected in series.
