If the engine is not getting to operating temperature replace your thermostat( located at the lower end of the top radiator hose in the water outlet on engine. If the engine IS reaching operating temp, take your hand and feel both heater hoses( they are 1/2"+ hoses that go thru firewall on pass side) both need to be hot; if only one is hot your heater core is plugged and you can flush it. I hope this helps you. Mark
You should check the thermostat to see if it is operating corectly, or your system may need to be perged.
either your heater control valve is bad or you heater control switch on your dash is broken pull the knob of and see if it is cracked.
You may have a stopped up heater core, or it may be a faulty heater door or heater door control. Answer: Check coolant level. Replace thermostat. Check heater control cable, located under small cover above the the passenger floorboard, near the console.
Compressor not running? Check fuses, check switch
it could be your thermo stat
Heater core changed three years ago,I changed Thermostat Heater still blows cool air.
can you please clarify what you mean, do you mean that the front heater blows cold but the rear blows hot or do you mean that when the heating is on cold it blows hot? many thanks paul
the heater blows warm air when fan is on low but blows cold air when fan is turn to higher setting
Get the air out of your heater core.
The heater fan ONLY blows the air, it does not make the temperature of that air. Your heater temperature controls how hot the air is. Adjust your heater temperature for hotter or cooler air.
Horn button is a momentary switch. Yours sounds stuck. Check the contacts. Once it grounds, the horn blows & sounds grounded.
we changed radaitor & thermastate , now heater blows cold air