Theres one in my 1983 Chevy c-10
Use the Rarebits4classics 471CR adaptor kit with Z93 or GFE150 filter.
PZ-9A fits a Chevrolet S-10 2.2 L 1998-2003 among other vehicles
AE-10 is a part number from Zinga, which is the same as the WIX 51551. Usual application is as a hydraulic oil filter. It is a 10 micron filter.
10 quarts without the filter, 11 quarts with the larger PowerStroke filter which is highly recommended (yes it will fit perfectly).
Use a quality oil filter wrench and turn the filter counterclockwise.
It doesn't fit any car it's aDispensing Pump Fuel Filter (UL Approved) (10 Micron) - Can be used w/ gas or diesel89006 | CARQUEST | Wix 24006http://www.wixfilters.com/filterlookup/PartDetail.asp?Part=24006
If you mean that you changed oil , then RAN THE ENGINE with the old oil filter installed , then changed the oil filter , you just mixed the dirty oil in the old engine oil filter with the new oil that was just put in . So , not the best thing to do
10 40 sae
Take the oil filter off and remove the threaded piece that the oil filter screws onto with a #10 allen wrench, it will fit up inside of the center. Then with I believe a #40 torks remove the two bolts that holds the adapter to the block, once the adapter is removed, screw the center threaded piece that you first removed into the block and install a new oil filter. Then you can remove the oil lines from the radiator.
Requires a special wrench tool. Look on eBay for "Volvo Oil Filter Wrench" They are about $10.
It is inside the oil pan, is this is automatic. If not, there is no filter.