What does a tension pulley looks like?
what the devil is a tension pulley? there is a website where you can research this it's www.facesreunited.webs.com or you can go on google images and search it.
You don't. The serpentine belt tension is automatically maintained by the tensioner pulley, which is an idler pulley located on the passenger side of the system and looks like it doesn't drive anything. If the belt tension is incorrect, the tensioner pulley must be replaced. If the question meant 'how to release tension from the belt' (for removal, etc.), this is done by applying the correct size socket wrench to the tensioner pulley's center nut…
What are the different features of a single fixed pulley a single movable pulley and a multiple pulley system?
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt. If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
u need to relaese tension on the tension pulley. this is usually done with a long socket wrench handle. when u release tension and remove belt you then release tension on pulley until you have routed new belt . you then move tension pulley again until you can put belt on it, then release pulley and it will automatically provide correct tension
Buy a Chevy!!!! That was a big help. Most but not all serpentine belt systems have a spring loaded tension pulley that just holds constant tension on the belt. If there is a tension pulley, it will be the one pulley that is not attached to anything like the alternator or AC. After that, the alternator is the most likely to be the one that adjusts.