0
What does it involve to change a gear selector light bulb in a 2001 ford mustang automatic?
Wiki User
∙ 11y ago
You'll need a 20pt torx bit on at least a 3" driver. Start by parking the car on level ground. Apply the parking brake. Turn the key to 'on', press the brake pedal and move the shift lever to D or 2. The trim piece is snapped into place. I used my fingernails to pull it directly away from the console. When it's free, unplug the cigarette lighter cord from the back by pressing in on the locking tab while pulling away from the lighter fixture. Once the lighter is unplugged, you can remove the trim piece. (unless your car has another accy in the trim piece, in which case, unplug that, too).
Using the torx driver, unscrew the exposed screw on the driver's side of the console. It was covered by the upper-left corner of the trim piece. Pull the console piece gently away from the shift lever and unscrew the 2 torx screws holding the shift indicator assembly to the floor of the car. They are on the driver's side of the indicator. Then, carefully lift the indicator assembly up under the shift lever. There are two plastic pins on the passenger side of the indicator assy. Be careful not to break them. The lamp is in a holder, twist-locked to the underside of the indicator assembly. Twist the lamp holder counter-clockwise (looking from the top) ~1/8 turn and the holder will come out of the indicator assembly. It uses a 194 lamp. I used a 194LL because I don't want to have to do that again.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change a 1992 ford mustang gt from an automatic transmission to manual?
You are going to have to get a new car
How ofter you change automatic transmission fluid on Ford Mustang 04?
The automatic transmission fluid in a 2004 Ford Mustang should be changed every 30,000 miles or once a year. The manufacturer has made this recommendation available in the owner's manual as well.
Is it possible to change a 1966 mustang from automatic to maual And what is an estimate on how much it would cost?
CLICK UNDER RELATED LINKS FOR ANSWER
Can a manual transmission fit into an automatic Ford Mustang?
You can fit a manual transmission into an automatic Ford Mustang as long as you have the same engine but you will have to change a lot of things. Depending on the year, you would have to change things like the computer, wiring , steering column to add the clutch, etc. It would be better to buy one that's a 5 speed already.
How do you change the selector motor within the dash of a 1999 ML 320?
What selector motor are you meaning?
How does one change the light bulb illuminating the gear selector on the console on a 2001 Aurora?
change bulbs in gear selector of 2001 oldsmobile aurora
How to change tranny fluid on a 2006 gt mustang?
Automatic takes 11.9 quarts Manual V6 takes 2.75 quarts Manual V8 takes 3.2 quarts
How do you change an auto gear selector in a ba falcon?
geat a new gearbox mate gant change them
Does a change in position always involve a force?
Yes, a change in position always involve force.
How do you change rear disc brakes on 2002 mustang v6?
how to change front and rear brakes on a 2003 ford mustang V-6
Do physical changes involve change in energy?
Yes, physical changes involve a small change in energy.
Can you change a 1989 Mustang from automatic transmission to manual and about how much does it usually cost?
Yes, it can be done. However, it requires a great deal of work, and will be fairly expensive if you cannot do the work yourself, and do not have a manual parts car.
