Honda Accord EX
Honda Accord DX
Definitions
Colors

What does the flashing red light that looks like a water can under the maintenance required light mean for a 1998 Honda Accord 2 door coupe?

456

Top Answer
User Avatar
Wiki User
Answered
2006-12-08 00:26:06
2006-12-08 00:26:06

Coolant is low, sensor is probably in the overflow bottle so the car may not overheat, but it has no reserve if you are slowly losing coolant. Just fill it to the indicated mark,

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why

It just needs an oil change. If you take it to a Honda dealership to get it fixed, they will normally reset it for you. On the 1995 Honda Accord station wagon, the 'maintenance required' indicator is easily reset by using a key to push in the little flat 'button' located near the indicator.

Get your oil changed, and have the service reminder reset.

what is b123 service code for 2008 honda accord

HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD

1992 HONDA ACCORD DX L4 2.2http://www.partsamerica.com/Maintenance/MaintenanceSchedule.aspx 1992 HONDA ACCORD EX L4 2.2http://www.partsamerica.com/Maintenance/MaintenanceSchedule.aspx 1992 HONDA ACCORD LX L4 2.2http://www.partsamerica.com/Maintenance/MaintenanceSchedule.aspx Hope that helps! -Josh-

It has a permanent filter mounted in the fuel tank, no maintenance is required.

It meand you need perform maintenance on the vehicle. Check the owners manual for what is recommended at the car's mileage

It means there is scheduled maintenance required. Your owners manual will tell you what is needed.

The 2006 Honda Accord 4 cylinder has a timing chain, no maintenance required. The V6 has a timing belt that must be replaced every 110,000 miles.

The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.

It is a reminder to do preventative maintenance. It comes on after a required number of mules. Does not mean that there is a problem wirh the vehicle. You can use a key to push in the slots to reset to green.

Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.

means u need to take it to Honda dealer, many things can be wrong nothing specific

push key into the slot to reset.turns red every 6000 miles.

Normally it means change the oil/filter but it can mean other things. Your owners manual will tell you.

The timing chain on a 2006 Honda Accord 4 cylinder is designed to last the life of the engine and is normally replaced during a complete engine rebuild. No scheduled maintenance is required.

The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.

the dealer should of reset it when they did the service. To reset the maintenance required button, insert your key into the slot next to the required maintenance button on the dash and push it in. It will reset the button to "green".

It means there is maintenance that needs to be performed based on the mileage on the odometer. It can be nothing more than it needs an oil/filter change but it can also mean it needs a new cam belt or some other maintenance. Your owner's manual outlines exactly what needs to be done at the mileage now on your Accord. Neglect the required maintenance at your own peril.

The check engine light may be flashing on a 1996 Honda Accord if a timing issue is detected or oil pressure is low. The exact cause can be determined by connecting an OBDII code reader.

Push and hold the odometer reset button while at the same time turning the ignition switch on but do not start the engine. After 5 seconds the maintenance required light will go out.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.