If it is the intake manifold, there will be vacuum leaks, backfire, and poor performance. If it is the exhaust manifold, you will have loud exhaust noise which may warrant a citation - also, emissions control laws will be violated. Take the manifold ro a shop where it can be re-surfaced or try to find a product at your local auto parts store that will help seal the manifold. - Good luck.
The manifold gasket is the same as the plenum gasket. The manifold gasket is a barrier between the manifold and the engine block.
if it is just a blown exhaust manifold gasket it can ruin your valves, so replace it correctly and make sure everything is clean before putting on the new gasket
Remove the manifold and change the gasket. And voila!!!
Remove the intake manifold retaining bolts from your 1993 Mercedes-Benz manifold. Remove the old manifold gasket. Clean the surface and put the new gasket on.
The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.
Remove the intake manifold retaining bolts on your 2003 Chevrolet Malibu. The manifold will come off. Remove the manifold gasket and clean the surface. Put the new manifold gasket on and reverse the process.
Replace gasket why does gasket keep sliding
Yes, you must install a new intake manifold gasket.
Remove the intake manifold retaining bolts from your 1996 Chevy Astro Van. Remove the manifold gasket and clean the surface. Reverse the process to install the new intake manifold gasket.
If it is leaking from a bad head gasket, it is because of a bad head gasket. If it is leaking from a bad intake manifold gasket, it is because of a bad intake manifold gasket.
An exhaust leak is usually the result of a bad gasket or a cracked manifold. For a proper fix, either the gasket or both the manifold and the gasket must be replaced.
You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.