Want this question answered?
If you run it that way you will cause internal damage.
Hydraulic fluid should be poured in the oil tank.
Ford 250 1994
vehicle will overheat. just dump the oil and antifreeze , flush engine and refill with clean oil
You have a mess.
you have a big problem
If it's not a lot there shouldn't be any problem. The two are not going to mix, the oil isn't going to affect anything in the system.
To add hydraulic oil to an old Belmont barber chair, locate the nut on the base of the chair down by the foot area. Remove the nut and add the oil by using a small funnel. A Belmont barber chair must not be laid on its side for transporting because the oil will leak out.
It will destroy the engine from lack of lubrication and overheating.
hydraulic tappet's does it have enough engine oil if yes flush engine oil and add new
When antifreeze is poured into your oil, it weakens your oil cause it to break down prematurely and can cause your engine to fail by spinning an engine bearing and even smoke. This is also a sign of a blown head gasket.
Hydraulic fluid and hydraulic oil are one in the same.