emergency brake lights are controlled by a switch usually at the lever or nearby, you can disable it by crossing the wires but it is better to replace it so that you are not driving around with the brake on by accident try cleaning the switch first so that it goes in and out easily.
The running lights will turn off when the emergency brake is on by tripping a switch connected to the emergency brake. Pushing in the emergency brake slightly will do the trick, but make sure you don't push in too far or you will be driving with the emergency brake on!
if they are daytime running lights you can not shut them off without pulling the fuse. but if you are parked and want them to go off you can apply the emergency brake and they will go off til you let off the emergency brake.
Has to be in park with the emergency brake on, or maybe they would turn off if you just tripped the switch on the emergency brake without actually engaging it. That way it wouldn't have to be in park.
mash the emergency brake one click and that should turn them off
If you just want them off when your parked, just put on the emergency brake.
The 2001 Kia emergency brake can be adjusted with the emergency brake adjustment bolt. The adjustment bolt will be on the emergency brake pad.
emergency brake light stays on
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
how to adjust the emergency brake
Be for starting the van press down on your emergency brake one click then start the van. As long as you dont use the emergency brake your running lights should stay off. To permanently dissable them you could try defeeting that switch
Bad switch on the emergency brake handle.
Fix the emergency brake