Ohm's Law: Volts = Amps * Ohms That means that you have 45 volts across the resistor. Power = Volts * Amps That means that you 3.375 Watts going through the resistor.Alternative AnswerMultiply the square of the current by the resistance.
The value of a resistor with 5 volts across it and 20 milliamperes of current flowing through it is 250 ohms. Ohm's Law: E = I R R = E/I
I don't see a question. Please clarify if you want an answer.
You just stated that the voltage across the resistor is 15 volts, so that's your answer ! If the resistor is connected to a 15-V battery or to the output of a 15-V power supply, then a meter across the resistor is also across the power supply, and reads 15 volts. The current through the resistor is (V/R) = (15/2700) = 5.56 mA. The power dissipated by the resistor (and delivered by the battery) is (V2/R) = (225/2700) = 0.083 watt.
Ohm's Law says Volts = Current x Resistance so R = 110/6.2 = 17.742 Ohms
Assuming it's 90 v dc, get a 1.5 k-ohm resistor and an 82 k-ohm resistor. Put them in series across the supply, then there will be slightly over 1.5 v across the smaller resistor.
The question is incomplete without the voltage across the resistor. For example: if V (Voltage across 500 ohm resistor) = 5 Volts, then, Current, I = 5/500 Ampere = 0.01 A.
If there's nothing else between the ends of the resistor and the power supply, then the voltage across the resistor is 24 volts, and the current through it is 2 amperes.
The question is a bit ambiguous, but I will try to address it. If the 6 ohm resistance is in series with another resistance then some of the 5 volts would be dropped across the 6 ohm resistance and the remainder of the voltage would be dropped across the other resistance. To calculate the voltage, use the 'resistor voltage divider equation' (Google it). If the 5 volts is applied across only a 6 ohm resistance, then the top of the resistor is at 5 volts and the bottom of the resistor would be at 0 volts. The resistor would drop all of the voltage.
Ohm's Law: Volts = Amps * Ohms That means that you have 45 volts across the resistor. Power = Volts * Amps That means that you 3.375 Watts going through the resistor.Alternative AnswerMultiply the square of the current by the resistance.
The value of a resistor with 5 volts across it and 20 milliamperes of current flowing through it is 250 ohms. Ohm's Law: E = I R R = E/I
The voltage across the resistor can be found using Ohm's law: Voltage = Current x Resistance. Thus, Voltage = 2 amps x 12 ohms = 24 volts.
What is the amount of current flowing through the resistor? Voltage drop is dependent on the current. Ohm x Amps = Voltage drop
I don't see a question. Please clarify if you want an answer.
The current would be about 20 volts.
To tell you that we need to know the resistance of the entire circuit.
Ohm's law: Volts = amps times ohms In the case of a 4 ohm resistor with 1.5 amps of current, the voltage is 6 volts.