in ic 7805 their is two capacitor is used one of them is used for the settling/transient time and another is used to provide inductive effect....
The smoothing capacitor converts the full-wave rippled output of the rectifier (which is left over AC signal) into a smooth DC output voltage A smoothing capacitor after either a half-wave or full-wave rectifier will be charged up to the peak of the rectified a.c. Between peaks of the a.c. the stored voltage will drop by a degree dependent on how much current is drawn from it by the load. The larger the value of the capacitor, the less drop there will be, and therefore less ripple when loaded.
when the DC current flows through the capacitor .the leakage of the charges is in capacitor called Dc leakage capacitor .
The run capacitor is used when the load is functional while the start capacitor is used to produce the initial torque to drive the load.
A trimmer capacitor is a semi-adjustable capacitor placed across a variable tuning capacitor and pre-set to allow the main capacitor to track correctly with another variable capacitor on the same shaft. The adjustment takes out any differences introduced by the connected circuit.
Under the flux capacitor
in ic 7805 their is two capacitor is used one of them is used for the settling/transient time and another is used to provide inductive effect....
Since a capacitor resists a change in voltage, it is used to provide voltage to the regulator circuit between the point in time where the rectifying diode turns off, and the point in time where it turns back on. It is a low-pass filter.
The smoothing capacitor converts the full-wave rippled output of the rectifier (which is left over AC signal) into a smooth DC output voltage A smoothing capacitor after either a half-wave or full-wave rectifier will be charged up to the peak of the rectified a.c. Between peaks of the a.c. the stored voltage will drop by a degree dependent on how much current is drawn from it by the load. The larger the value of the capacitor, the less drop there will be, and therefore less ripple when loaded.
when the DC current flows through the capacitor .the leakage of the charges is in capacitor called Dc leakage capacitor .
The reactance of a capacitor is a function of -- the capacitance of the capacitor -- the frequency of the voltage across the capacitor
You can not by-pass the capacitor in an electric motor. Most are capacitor-start motors which require the capacitor to be operational in order to start. If the capacitor is not working then it will need to be replaced.
The capacitor before the IC is filtering the output of the rectifier, so that the minimum voltage dip between diode conduction cycles is greater than the minimum voltage the IC requires. The capacitor after the IC is stabilizing the IC, by preventing it from oscillating, and responding to quick changes in load faster than the IC can.
Voltage regulator is a device which regulates the voltage or maintains a stable voltage irrespective of the fluctuations caused in the main line voltage. It contains a diodes and a capacitor. The capacitor discharges whenever there is a downfall of voltage in the main line and it keeps on charging the remaining time. the diode avoids the excess voltage to enter the circuit thereby maintaining a constant voltage.
GANG capacitor is called so because it group of capacitor
when a capacitor is connected to earth the potential of capacitor becomes zero. as a result all the charge residing on the conductors of a capacitor passes away and the final charge on capacitor becomes zero
Which regulator and what year? You have a window regulator, voltage regulator, fuel pressure regulator to name a few.