I use 35. gr to start and have worked up to 35.5 gr but all guns are different and you should start lower and safly work up, h4895 and IMR4064 are the two best powders in my 250 so good luck and be safe
What is a good deer load
You need to talk to a gunsmith. DO NOT TRY TO DEVELOP A LOAD WITHOUT TALKING TO A GUNSMITH!!!!!!!!!! <><><><> Please check for data from the powder manufacturer, the bullet manufacturer, or reloading manuals. Asking for load data from an anonymous open source such as WikiAnswers could be extremely dangerous, since anyone may answer a question here. I COULD be 12 years old, and Mom does not know I am using the computer. Please see the link at the bottom of the page. Your powder is sold in the US as Hodgdon H4895. Have not seen loads for a 26 grain bullet.
We had been using surf excel washing powder for top load machines. We found it good and did not damage cloths.
Load Capacity
yes, if you're using Nintedo DS you can trade it, and if you're using an emulator, load it via Pokesav.. Good Luck..
A load can be lifted easily by using a pulley system.
HAProxy is a solid open source load balancing firewall software. The term "open source" means that it is absolutely free for you to download and begin using.
A 'load' is a device that does work by using electricity. 'Load' can also refer to the amount of electricity used.
You can load an arrow into your bow in SurvivalCraft using the game controls.
No good idea. The CT may not function well at a load beyond 630 amps. It may even fail at higher load (than 630 amps)
Either ways Good !! But it would be good if your use your cord instead of taking out SD card !!
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.