what is the job of a one-way clutch
There is no way 2 adjust the clutch. The only way is 2 replace them. Clutch & pressure plate & throw out bearing, replace them all in one shot!!
Just make the clutch pads line up with the clutch disk. the pressure plate can only go on one way due to the positioning dowels
It will turn one way and not the other.
shaft should only spin one-way
The uni-directional clutch will transmit a drive when rotated in one direction and will 'freewheel' when turned in the opposite direction. The one-way clutch has rollers that move up the ramps and the wedging action provides a drive from the inner to the outer member. If the outer member rotates faster, then the rollers will move down the ramps to the wider section and no drive will be passed to the inner member. The main units in an overdrive are a simple epicyclic gear train, a hydraulically operated friction clutch and a uni-directional (one way) clutch. The uni-directional clutch will transmit a drive when rotated in one direction and will 'freewheel' when turned in the opposite direction.
FOR ME THERE IS NO WAY TO BLEED A CLUTCH ON A SATURN BUT IF YOU REPALCE ONE PART SOMETIME ITS POSSIBLE. 20 % CHANCE .THE ONLY WAY ITS TO REPLACE THE SLAVE AND THE CYLINDER AS A SEALED KIT
One way to do this is to look in your owner's manual. The complete clutch kits average in price close to $200.
The same way you use a motorcycle clutch.
use a one man bleeder
A Coach clutch can be purchased directly through Clutch at one of their retail locations. One is also able to order a Coach clutch directly from the Coach website.
Possibly the clutch was installed facing the wrong way, or the clutch has not had enough time to properly seat.