idk but im doing Plumbing merit badge for scouts so i need to know
Retaining nut> a donut looking (round or stop sign shaped) PVC or metal part that has a threaded hole in the middle to screw down and hold the faucet in place so that it does not move (you have now "retained" it - kept in place; held in place; to keep from moving or leaving)
A retaining nut could be the packing gland nut on a valve stem or the nut used on a flare or compression fitting
Remove retaining nut
take off a retaining nut?
296
because your retaining nut came off fifth gear
The 2002 Chevy Silverado dipstick tube is held in place with a retaining nut at the bottom of the dipstick tube. Loosen the retaining not in the dipstick tube will lift out.
The clutch cable has a retaining nut on each end. Loosen the retaining nuts. The clutch cable will pull out. Reverse the process to install the new cable.
You can replace the map light bald, on your Chrysler 300, by removing the decorative retaining nut. The lens will come off with the nut, exposing the light bulb.
The brake line will have a retaining nut on each end of the line. Loosen the retaining nuts. Reverse the process to install the new brake line.
The hood release cable is held in place by a retaining nut on each end of the cable. Remove the retaining nuts and the cable placement retainers. Reverse the process to install the new hood release cable.
The 1996 Chevrolet Blazer shifting cable will have a retaining nut on each end of the cable. Loosen the retaining nuts. Remove the cable routing retainers. Reverse the process to install the new cable.
You have not loosened the retaining bolts and nut so that the adjuster will move (more than likely).