0
Torx is a six sided star shape used on bolts. Draw a hexagon or six sided shape and on the flat sides between the points draw a V half way to the center between each point. That is the Torx shape.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What size star socket is needed for the calipers on a 1995 Mercury Villager?
Torx T 40 socket
What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
What size Torx bit do you need to remove the caliper of a 2000 Silverado?
T55 TORX BIT ON THE FRONT 12MM SOCKET ON THE REAR!
How do you get a torx bolt out of a jeep?
Many auto repair shops like advance auto, autozone, pep boys... etc have torx bits either in the form of a screwdriver with the torx bit on the end or as a socket for your socket wrench. On the funnier side.... just pick it up! Here's your sign.
What size torx head socket do you need to remove the front bumper of a jeep wrangler?
The correct size Torx bit is a T-55.
What size torque socket do you need to remove the brake caliper on 2001 VW jetta 20?
it is an Allen wrench not a TORX socket
Where is the IAT sensor on a 1996 Saturn SL1?
Behind the throttle body opening under the throttle position sensor. Takes Torx t-20 bit to remove -- 2 screws, use Torx bit on a 1/4" socket drive with a 1/4" socket to break seal on Torx screws.
How do you replace Volvo v70 license plate bulb socket?
You need a torx screwdriver....
What size torx socket is used to replace the hub assembly on a 2002 Chevy Cavalier?
T-55 Torx Socket (DO NOT USE AN ALLEN WRENCH) - To remove the 3 bolts that secure hub assemble to steering knuckle. 1 -3/16 deep socket - To remove axle spindle nut.
What type of torx socket do you need for the two bolts that hold the ignition switch on a 1998 chev k1500 4x4?
its called an inverted torx, but I dont remember the size
What is the tool that you use to take off the tilt on the culmm so you can get to the igniton?
inverted torx socket.
What torx socket is required for my 2001 GMC sierra front brake caliper?
t-55
