From wikipedia
Antifreeze is used in internal combustion engines, and for many other heat transfer applications, such as electronics cooling and chillers for HVAC. Compounds are added to water to reduce the freezing point of the mixture to below the lowest temperature that the system is likely to be exposed to, and to inhibit corrosion in cooling systems which often contain a range of electrochemically incompatible metals (aluminum, cast iron, copper, lead solder, etc.). The term 'colligative agent' is to be preferred as, in warm climates, the benefit of these compounds is to increase the boiling point of the coolant, which should then be more properly referred to as 'anti-boil', and as anti-freeze decreases and increases both properties, respectively, 'colligative agent' more accurately describes the liquid. The term 'engine coolant' is widely used in industry.
You have a coolant leak.You have a coolant leak.
How to prepare coolant for machineries and the formula for coolant
The coolant level is low.The coolant level is low.
The amount of coolant it will take to fill your vehicle is dependent upon how low the coolant level is. You can add coolant to your coolant reservoir. The reservoir will have an indicator of when the coolant system is full.
You should not mix colors or brands of coolant.
coolant fan
No.
no
Anitfreeze IS coolant
Add coolant to the full cold line on the coolant reservoir when engine is cold.
The coolant resevoir on a mercedes is the same as it is on any vehicle it just might be a different shape. Your coolant resevoir is where you store excess coolant and where exess coolant from your radiator goes.
No, the electric cooling fans turn on and off by a signal from the coolant temp sensor. The coolant level sensor only illuminates the low coolant light when you are low on coolant.