a generous file to assimilate the encryption for dsl modem router
Connect a router to the DSL modem, and if necessary add a switch to the router. Then connect all of your systems to the switch and the router.
What describes the external IP address that is obtained by a router through a cable or DSL modem?
A router and a modem are two separate things. There are a few different modem/router combo's, but typically you will need both items.
You should be able to.
Yes. You must first make sure your DSL modem is just a modem not a modem and a router. Then you must setup your DSL modem in "bridged mode". Next log into your router and change it from DHCP to PPPoE and enter your DSL username and password in the proper fields. All will work well from that point on. Thanks, Jonathan D. Raper Superior Computer Technologies, inc
The question would be easier to answer if you included the specific model # of the Netgear router you are trying to configure. You can not connect a netgear router or any other router directly to a DSL line unless it also functions as a DSL modem. You can connect a router to a DSL modem which connects to a DSL line.
dsl cable router
Yes
A digital subscriber line (DSL) modem is a device used to connect a computer or router to a telephone circuit that has digital subscriber line service configured.
The short answer is that you don't. Sure, you can plug a fax modem into a phone line that supports DSL, but it is just using the dial-up capabilities of the line and not the DSL capabilities. A regular modem like that functions like a telephone and transmits in the audible frequency range and not the higher DSL frequencies. With DSL, you'd use a DSL modem (with or without an included router), not a dial-up modem.
Most routers will be compatible with your DSL Modem. I've used LINKSYS for years without any problems.
# Connect a DSL modem to the DSL line # Connect an Ethernet wire from the modem to the Mac. # There is no step 3. Unless you want to stick a router in between and get a network going.