0
Depending on how much lime you wish to spread on your lawn or garden, the setting will vary. To achieve an application rate of 1.75 lbs. per 1000 square feet a setting of 3 is used. An application rate of 2.25 lbs. for the same area requires a setting of 3.5 and 3.5 lbs. per 1000 square feet can be reached with a setting of 4.
What else can I help you with?
What is the scotts standard broadcast spreader setting for vigoro fertilizer?
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
What is the spreader setting for grub ex when using a sears broadcast spreader?
The recommended setting would be 3
What are the settings for a EZ broadcast spreader by republic?
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
How do you convert Scott's broadcast spreader setting to a drop spreader setting?
To convert a Scott's broadcast spreader setting to a drop spreader setting, you typically need to consult the manufacturer's conversion chart, as the settings vary based on the product and model. Generally, a broadcast spreader applies material over a wider area, while a drop spreader applies it in a narrower band directly below the spreader. A common rule of thumb is to start with a drop spreader setting that is about half of the broadcast setting, but it’s important to calibrate based on the specific material being used and the desired application rate. Always test on a small area first to ensure even coverage.
What are the settings for EZ republic spreader for scotts southern lawn?
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
Can you tell me what settings are for Ortho spreader and ez broadcast spreader by republic for fertilizer?
The correct setting for both spreaders is 3
What setting should you use for lawn seed on a broadcast spreader?
The setting for lawn seed on a broadcast spreader typically ranges between 3 to 5, but it can vary depending on the specific type of seed and the spreader model. Always refer to the seed package for recommended spreader settings and adjust based on your lawn's needs and your spreader's calibration. It's also advisable to test the spreader on a small area first to ensure even distribution.
What is the Scott's broadcast spreader setting for turpesan?
The recommended setting for applying Turfsan with a Scott's broadcast spreader typically falls around a setting of 3 to 5, depending on the specific model of the spreader and the desired application rate. It's essential to check the product label for precise instructions and to calibrate the spreader for your specific conditions. Always perform a test run to ensure even distribution and avoid over-application.
What is setting for Milorganite on a Scott Standard rotary Spreader?
11.5 for Basic or Standard
What are the settings for as E Z Broadcast spreader for Scott's southern turf builder?
You would want to use a spreader setting of 3.5. Go over the entire lawn 1 time.
What setting for scotts easy green for vigoro fertilizer 29-0-04?
For a drop spreader 7, broadcast 5
What is the conversion between Republic EZ broadcast spreader and scotts broadcast spreader?
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
