When setting the Scotts Standard Broadcast Spreader for lime pellets, it is important to refer to the manufacturer's recommendations for the specific product being used. Generally, lime pellets are larger and heavier compared to grass seed or fertilizer, so a higher setting on the spreader may be required to ensure proper coverage. It is recommended to start with a conservative setting and make test passes in a small area to determine the appropriate setting for even distribution of the lime pellets.
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
The recommended setting would be 3
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
The correct setting for both spreaders is 3
The setting for lawn seed on a broadcast spreader typically ranges between 3 to 5, but it can vary depending on the specific type of seed and the spreader model. Always refer to the seed package for recommended spreader settings and adjust based on your lawn's needs and your spreader's calibration. It's also advisable to test the spreader on a small area first to ensure even distribution.
11.5 for Basic or Standard
The recommended setting for applying Turfsan with a Scott's broadcast spreader typically falls around a setting of 3 to 5, depending on the specific model of the spreader and the desired application rate. It's essential to check the product label for precise instructions and to calibrate the spreader for your specific conditions. Always perform a test run to ensure even distribution and avoid over-application.
You would want to use a spreader setting of 3.5. Go over the entire lawn 1 time.
For a drop spreader 7, broadcast 5
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
1