0
The recommended setting for applying Turfsan with a Scott's broadcast spreader typically falls around a setting of 3 to 5, depending on the specific model of the spreader and the desired application rate. It's essential to check the product label for precise instructions and to calibrate the spreader for your specific conditions. Always perform a test run to ensure even distribution and avoid over-application.
What else can I help you with?
What is the scotts standard broadcast spreader setting for vigoro fertilizer?
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
What are the settings for EZ republic spreader for scotts southern lawn?
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
What are the settings for a EZ broadcast spreader by republic?
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
What setting for scotts easy green for vigoro fertilizer 29-0-04?
For a drop spreader 7, broadcast 5
What is the grub ex spreader setting with scotts drop spreader?
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
What setting for a scotts spreader for grass seed?
What is the Ortho Spreader 5000 for overseeding
What setting is used on a Scotts Deluxe spreader to broadcast white clover if the rate is quarter pound per 1000 square feet?
1
What are the settings for earth way broadcast spreader for scotts turf builder plus 2?
For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.
What is the conversion between Republic EZ broadcast spreader and scotts broadcast spreader?
The Republic EZ broadcast spreader and the Scotts broadcast spreader do not have a direct conversion, as they are designed for different types of applications and may have varying settings for seed and fertilizer types. However, many users find that a general rule of thumb is to adjust the settings based on the specific product being used, often starting with a mid-range setting and adjusting as needed. It's important to consult the product manual or guidelines for each specific spreader to ensure accurate application rates.
What is the conversion from the K 1-2 setting on a Scotts commercial spreader to the Scotts residential spreader?
Unfortunately, there is no conversion. The spreaders are calibrated differently.
Setting for scott's rotary spreader of 13-13-13 fertilizer?
Setting for scotts rotary spreader of 13-13-13 fertilizer?
What is the K setting on a Scotts R8A spreader converted to on a Scotts Speedy Green spreader?
The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.
