1
Pin 1 on a ribbon cable is usually colored differently than the other pins. It is often red.
red
pin 1 goes here
What is the pin number for the ribbon cable?
These PC cables have a notch or key on one side of plug and can only be inserted in one orientation in connector socket. If the notch is missing, you may also look for a small arrow mark on pin 1 of the cable plug. Other marking is that the ribbon or flat cable some times will have the first wire in a different color compared to rest of the cable. - Ron Patton
The stripe down the side of a cable typically indicates pin 1, and it is usually colored white or light in contrast to the rest of the cable, which is often black or a darker color. This color coding helps to identify the orientation and ensure proper connections in various types of cables, such as ribbon cables or audio/video connectors. Always check specific manufacturer guidelines, as color coding may vary.
On a standard patch cable the ends are wired the same. Pin 3 connects to pin 3.
3 types of ribbon cables found in a PC are, a 34-pin floppy drive cable with twist, a 40-pin IDE cable with 40 wires, and a 40-pin IDE cable with 80 fine wires(80 conductor cable)A floppy drive cable, an IDE cable, and a CD or DVD drive cable
You don't say what kind of cable. If you're talking about CAT5 or 6, it's connected to pin 4.
There are two types, a 25 pin male to 25 pin female, and the most common, 25 pin male to a Centronix, which is what printers use. There are 25 pin cables that is not are not printer cables, but they are very uncommon. Almost all the time when someone refers to a parallel cable they are referring to a printer cable, which is a 25-pin to Centronix cable.
The Belkin Flexible USB Cable Adapter is 4 pin.
Disconnect the negative cable from the battery,disconnect the hydraulic line from the slave cylinder.Using a hammer and a punch,drive out the roll pin from the cylinder.The roll pin is the little black thing just below the line