0
That is you vacume assist line. un hook it, plug it and see how well your brakes work..
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is the vacuum hose diagram for a 1992 Crown Victoria What hose is connected to the brake booster?
you need manifold vacuum for the brake booster.. (intake manifold)
Where does the vacuum hose on the brake booster go on the intake on a 2001 Dodge Neon?
On the left-lower part of the intake manifold (if facing the motor.) The hose runs underneath the manifold.
Why does the Car stalls out when slowing down or stopping but when it is first started it runs fine until it is put into drive?
check the brake booster vacumme hose,its the hose than runs from the intake to the brake booster. if its leaking air the car stall when you hit the brakes or has no power
Where does the brake booster hose connect?
From the booster, to a vacuum source on the engine.
Where are all possible vacuum leaks on a Chevy 355?
Any place there is a vacuum hose, under the hood and under the dash. Also the Power Brake Booster hose. The Booster diaphragm may also be busted. An Intake Manifold Gasket or the Intake Plenum gasket are sources of a vacuum leak.
What is cause of hard brake pedal on 1993 toyota'S 4runner?
The cause of hard brake pedal is malfunctioning brake booster. Check the hose from the intake manifold going to the brake booster for cracks or leakage, replace if necessary. Check the one way valve located in the middle of that hose, make sure the valve opens when you put pressure on one port.. If all those mentioned are ok, the booster itself needs to be replaced....
How do you identify type of braking system ina 1995 Chevy G20 van for example vacuum or hydro?
The type of brake system with vacum assist will have a large diameter hose from somewhere on the intake manifold to the brake booster. The type of brake system with hydro-boost will have hoses from the power steering pump to the brake booster.
Where do the vacuum lines of the brake booster goon a 1994?
Normally the vacuum line from a brake booster goes to the intake manifold of a gasoline engine. Sometimes other lines will be tied in to feed vacuum to cruise control pots or 4x4 actuators, but the main hose will be larger.
How do the vacuum lines connect between the vacuum booster intake and PCV valve on a 1971 Chevelle because mine all T together?
the brake vacuum booster connects to the intake manifold all by itself and the PCV valve hose should hook directly to your carburetor.
Why is your firebird making a hissing noise?
Well there are lots of possible reasons, BUT Li key it is a vacuum leak, either the hose of Brake booster, and or intake is / has a leaking vacuum line.
Why would all wheel disc brakes feel hard when all are in good condition on a ram 3500 diesel?
Vacuum leak on hose from intake manifold to brake booster.
Where does the Brake booster hose on 85 Chevy pickup go to?
There should be a BIG vaccume port just behind the carburetor that is screewed into the intake and that's where it goes. Some carburetors had a vaccume port on the back of them that had a medal line that screewed into the back of the carburetor and the booster hose slid onto it. It can go in either place.
