0
What is the bolt size for the gas tank straps on a 1996 Chrysler cirrus lx?
Wiki User
∙ 13y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are the head bolt torque specs on a 1996 Chrysler Cirrus?
90 ft/lbs
What is the rim bolt pattern for a 2000 Chrysler Cirrus?
5 on 114.3 or 5 on 4 1/2
Where is the thermostat located on a 1995 Chrysler Cirrus LXI model with a 2.5L V-6 engine?
The thermostat on your cirrus is located at the end of your lower radiator hose where it attaches to the engine.It has a three bolt mounting at the outlet.I am just getting ready to change mine.. ...
Remove and replace alternator on Chrysler cirrus?
disconnect the battery. Remove the alternator belt then disconnect the wires. Unbolt the alternator and remove. Bolt the new alternator in then connect the wires, belt, and battery.
Where can you get the 3 star bolts or better bolt head option that attach to the back of the hub assembly on a 1996 Chrysler Sebring Convertible 2.5L?
The bolts can be purchased from your local Chrysler dealer.
What year did chrysler town and country minivan have transmission problems?
The main problems were from 1989-1992. 1996-1998 also had an issue with a bolt in the differential.The main problems were from 1989-1992. 1996-1998 also had an issue with a bolt in the differential.
Where is the crank position sensor on a 1996 Chrysler cirrus 2.5 engine?
under the distributor about 6 inches. You will see this big huge bolt and right next to it a smaller bolt which pertains to the crank sensor. you can follow a set of wiring down to the sensor. The bolt is a 10 MM to the right of the big bolt you find under the distributor. the sensor itself is black in color and the easiest way to take it off it to remove the tire and get a very long extension with a 10 MM socket and get in through the battery side of the car (driver side)
Is the center bolt on the crankshaft damper pulley reverse threaded on a 1996 Chrysler LHS 3.5L?
No. Counter clockwise to loosen. It is very tight.
What is the proper head bolt tightening sequence on a 1998 Chrysler Cirrus 2.5L MFI 6cyl the books have ten bolts but it only has eight?
1, 6, 10, 5, 2, 7, 9, 4, 3, 8
Is the bolt to the crankshaft pulley left threads or right on a 1996 Chrysler Sebring jx 2.4l?
It is right hand thread. Turn counter clockwise to loosen.
Will a 3L V6 and automatic transmission from a 96 caravan bolt into a 96 cirrus?
It is not a direct bolt in. May be possible though. Could involve alot of modifications.
What is the bolt pattern of a 2008 Chrysler sebring limited with a 3.5 engine?
The bolt pattern for what part?
