under the distributor about 6 inches. You will see this big huge bolt and right next to it a smaller bolt which pertains to the crank sensor. you can follow a set of wiring down to the sensor. The bolt is a 10 MM to the right of the big bolt you find under the distributor. the sensor itself is black in color and the easiest way to take it off it to remove the tire and get a very long extension with a 10 MM socket and get in through the battery side of the car (driver side)
No.No.
It is on the throttle body, opposite of the cables.
A Chrysler Cirrus does not have a mass airflow sensor.
A Cirrus does not have a mass airflow sensor.
It is built into the distributor, not available seperately.
It is top rear of the bell housing.
It is inside the distributor. You have to replace the distributor to service the cam sensor.
It is in the distributor, you have to buy a distributor to replace.
There was no 1990 Chrysler Cirrus. Look on the intake manifold or hoses for the intake temp sensor.
The throttle position sensor is not adjustable on a Chrysler 3.0L .
Yea, the crankshaft sensor is under the distributor and the camshaft sensor is inside the distributor, you cannot change it so you will have to replace the whole distributor.
The crank sensor is not in the distributor, it is in the top of the bell housing. The cam position sensor is in the distributor and is not available separately