Most likely a bad axle
have it checked you could have bent the axle and the noise would be the bearing
There are many causes for a tie rod on a vehicle to bend. This can occur due to hitting a pothole while driving or a curb.
1st thought is you need shims if the flywheel is hitting the starter. What is the year and model of the vehicle?
A bad enough " jolt " to the vehicle from a collision or hitting a bad pothole etc , anything that would make the little metal ball jump off the magnet and trip the switch
Fuel cutout switch is a safety item. It functions only in the event of a vehicle rollover, by cutting off the fuel supply from the gas tank. This is designed to limit the amount of free fuel in the event of a fire. ======================================================= Also , in a collision or maybe hitting a bad pothole , anything that jars the vehicle enough
The fuel PUMP inertia switch is a safety device that supposedly " trips " when the vehicle has been jarred in a collision or maybe hitting a really bad pothole . It is a mechanical switch that , when it trips , does not allow power to the electric fuel pump
Air hitting the vehicle will cause drag. The bigger the vehicle the more are drags.
The fuel pump shut off switch ( inertia switch ) is a safety device that cuts off the flow of power to the ELECTRIC fuel pump on a Ford when it has been involved in a collision ( or maybe hitting a really bad pothole , anything that " jars / upsets " the vehicle )
It's a safety device that " breaks " the electrical circuit to an electric fuel pump if the vehicle has been jarred enough from a collision or hitting a bad pothole That way no power is going to the electric fuel pump , and the pump doesn't keep pumping fuel until the switch is manually reset
With aftermarket or hang on parts not original to a vehicle some modification may be needed. If the caliper is hitting the inside of the wheel some light grinding of the caliper may be needed for clearance.
If the vehicle receives a substantial jolt from a collision or perhaps hitting a bad pothole , the inertia switch will trip and open the electrical circuit so that no power gets to the electric fuel pump - it's a safety device . If the switch trips it has to be reset manually by pressing the button down that is located on the top of the switch
Depends on the weight of the vehicle.