Most of the Rochester carbs were factory rated at 750 cfm; but this was a airflow rating only; unlike performance carbs that are flowed with a air and fuel mix. When the factory Rochester carb is wet flowed like a Holley carb, the flow rating of the carb is adjusted to around 470-500cfm. I hope this helps you. Mark
315 horsepower stock
Factory rating was 230 H.P.
What is the stock size tire for a 1994 sierra Z71
145-160 is the recommended range for stock carbs
It will do 100.
The 1996 4.3L engine doesn't have a carburetor, it is fuel injected.
There are a number of stores and garages that stock the Edelbrock Performer Series carburetor. Sites such as Advance Auto Parts, Edelbrock and Amazon all stock the engine.
Dodge Ram. (Not) 6.2L Ford Raptor, stock @ 411hp.
My 1986 GMC High Sierra 1500 stock transmission is a 700R4. My 1986 GMC High Sierra 1500 stock transmission is a 700R4. it could also be a th 400
It is a 4 bbl Rochester....
The stock adjustment for the Polaris 500 Ranger carburetor is approximately 1/8 turn off of the locked position. The adjustment changes slightly depending on altitude and weather.Ê
This was the last year for the carburetor. The stock fuel pump pressure was 7.5-9 psi.
the stock Toyota gear ratio is 4.11
Can't find any information on the 454 ever being installed in a 2500. Do a Google search and see what you find. GM did put a 454 in the 2500. I believe that the horsepower rating is about 290. Unfortunately i don't know about torque. i own a 98 k2500 with a 454,The Vortec 454 stock puts out 290HP 410TQ,
Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
230-235 stock hp
get rid of that stock carb.don't even try to rebuild, Nissan mechanics said that they are a2 part carb. and u cant get into both parts ,i got a32/36 webber,they aregreat
If it is a stock motor then yes it is. 600 CFM carburetor will be just fine on a stock engine.
If they are stock then there electric.