0
What is the correct Ignition coil gap for a 032 stihl chainsaw?
Wiki User
∙ 14y ago
5 to 14 thousandths
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where do you buy a replacement igniton coil for a 031ac stihl chain saw?
At your local Stihl dealer
What trouble can a bad coil do to a 1998 ford explorer?
I'm assuming you mean an ignition coil. If that is correct, an improperly functioning ignition coil will cause the engine to have a misfire, and could lead to severe engine damage if not corrected expeditiously.
In a computer-controlled ignition system the ignition module does what?
The ignition control module acts like the coil and sends the sparks to the correct cylinder when the computer tells it to.
What is the correct name for the coil or high tension voltage capacitor that Leads to a Spark Plug?
The correct name for the coil that leads to the spark plug is an ignition coil. If you go to a parts store and ask for anything else they will not know what you are talking about.
Where is the ignition coil on a 96 civic cx hatchback?
The ignition coil is inside the ignition distributor.
Have replaced the coil twice on 1999 Dodge stratus to correct code P0352 ignition coil primarysecondary circuit B malfunction. What else can it be?
Test the wiring between the computer and the coil.
Is an ignition module the same as a ignition coil?
No. The coil provides the spark and the module tells the coil when to spark.
Why is your stihl 020t chainsaw not turning off?
There is a grounding strap beneath the starter that serves as the circuit between the vibration-mounted handle and the engine. If you take the handel apart, you will be sorry. Look for the broken wire at the coil in lower front corner first.
What is the function of a car Distributor?
The distributor send high voltage from the ignition coil to the spark plugs. It ensures that they fire at the correct time and in the correct order.
Where is the ignition coil located in a 1998 tercel?
The 1998 Toyota ignition coil is located on the firewall, in the engine compartment. The ignition coil can be found on the passenger side of the firewall.
How do you replace a coil on 2003 Chevrolet Express?
REMOVAL PROCEDURE Remove the engine cover. Disconnect the spark plug wires at the ignition coils. Disconnect the ignition coil harness connector. Remove the ignition coil mounting bolts. Remove the ignition coil. INSTALLATION PROCEDURE Install the ignition coil to the bracket. Install the ignition coil mounting bolts. NOTE: Refer to Fastener Notice in Service Precautions. Tighten Tighten the ignition coil mounting bolts to 8 N.m (71 lb in) . Connect the ignition coil harness connector. Connect the spark plug wires at the ignition coils. Install the engine cover.
What type of stock ignition coil is best for a 1968 ford 302 V8?
There is no BEST. There is stock, and aftermarket. To get the proper " stock " coil bring the engine information to the parts store and the correct Motorcraft igniition coil will be what you get.
