No you can't use a 415v motor in a 240 v socket.
no
Current shall increase while you apply 415V for operating it and will decrease the rpm to a much low level.
The voltage range should be marked on the case but without that information a 5% increase can be assumed, so 504 v.
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
in low voltage connection in wye (star conncetion) 415v high voltage connection in delta 480v
In the supply industry it refers to circuits of below 1000 volts. Common voltages used are 120v, 208v, 230v, 240v, 277v, 400v, 415v, 480v.
No you can't use a 415v motor in a 240 v socket.
415v air circuit breaker acceptable value of 0.01 ohms and lessthan
Not directly, you would need to transform 480v circuit to 120v with a transformer first.
no
Current shall increase while you apply 415V for operating it and will decrease the rpm to a much low level.
In India its 415V, 50Hz.
The voltage range should be marked on the case but without that information a 5% increase can be assumed, so 504 v.
That's 277 volts of alternating current. This is typically one phase of a 480v 3 phase system. Don't worry that 3 x 277 adds up to more than 480v. A 277v line is typically one phase of a 480v 3 phase system.
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
Answer: To determine the amperage in a circuit. Notes: Power (in watts) = Volts * Amps 16.4 KVA = 480V * Amps 16400 / 480 = Amps ~34.2 = Amps