hi peoples the answer is the disturbitor cap one number is 1342 and the other is 5432
your distributer cap is probably loose. so u need to have some one try to start it while you rotate it. basically need to time it. i tryed that
Have you checked the ECM relay? it controls everything and nothing will work without it
When changing the lights on a 1995 Acura Integra remove the dash on the center console and pull it off. Remove all the accessories and reach the old bulbs. Replace the bulbs.
If it is the original ignition, you should be able to get a key from the dealer with the V.I.N. The number on the dash.
if u do it urself n buy the radiator for liek 120-150 bucks
There is no difference. Acura is Honda and Honda is Acura. All Acura is is Honda's higher end line of cars or aka luxuary. Every part on a Acura is made by Honda.
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
no spark
$200
inside the distributor inside the distributor
within the distributor
Depends on what year and type of model you have. For instance a GSR distributor WILL NOT fit a regular Acura Integra. Open your driver side door look the sticker see what year it is and try to find out what your engine is as well.
1 3 4 2
1-3-4-2 in a clockwise rotation... = 1993 Acura Integra 1.8 liter DOHC L4 =
if it looks exactly alike and bolts on exactly the sameway, it will work.
right under your distributor down a little lower.
Ignition timing is set on a 1989 Acura Integra by setting the distributor to the appropriate angle. When set at the factory recommended angle the car will turn over with no problems.