Yes, the easiest way just change on a 97 BMW 740 il. It's always been like that and that's the way that it will in all likelihood stay
To change the blower motor resistor in a 2002 Nissan Maxima, locate the blower motor resistor under the glove compartment on the passenger side of the vehicle. There is a clip that is depressed and then the resistor will slide out. Remove both ends of the resistor and then replace with the new resistor.
A malfunctioning blower motor resistor will cause the blower motor not to work. When the resistor is bad the blower motors will not turn on.
You will need to change the blower motor resistor by finding it near the air duct system. You will take the old resistor off and replace it the same way.
easiest to pull blower motor then you can get at resistor, best to have a flexible extension (not a swivel) and you can access the bolts easier
How_do_you_replace_a_blower_motor_resistor_in_a_2000_Grand_Am_GT
Please email me a photo of where the blower motor resistor is and how to change it. Thanks, Michael. By the way I want it for a 2000 Sunfire not a Grand Am.
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.
Resistor is a separate unit from the blower motor
Generally the blower motor resistor is found close to the blower motor. It relies on the blower motor to keep it cool.
The blower motor speed resistor is burned out. The resistor is located close to the blower motor and is easy to change. Your local auto parts store will have that part for you.
The blower motor resistor has failed.The blower motor resistor has failed.
Fig 15 Blower Motor ResistorNOTE: The blower motor resistor is located on the lower right side of the heater housing.REMOVAL# Remove lower right underpanel silencer/duct. # Disconnect wiring connectors on blower motor resistor. # Remove blower motor resistor retaining screws. # Pull blower motor resistor out of heater housing.