Up to 1000 USD depending on how original the parts are.
If all parts are original, no parts updated, never arsenal overhauled, multiple thousands
On my 1950s vintage Ithaca Model 37 16 gauge it is on the right side of the end of the receiver where the magazine tube and barrel go into the receiver, and also on the barrel adjacent to the number on the receiver. The numbers should be the same on both the barrel and receiver unless the barrel is not the original barrel, at least on mine they are.
That the barrel (not the gun, the BARREL) was made in June 1944. Posibbly an M1 Garand, or an 1903 Springfield?
Interesting, the receiver was made after 1930 and the barrel 1922. Doubtful if the barrel is original.
Depends on condition and whether it has the original box and papers.
Check the receiver and barrel
between the stock and the barrel
Best is take it to a gunsmith as the 94 receiver can be damaged if not done properly. The gunsmith will use a special receiver support which is wedged inside to support the receiver sides. He will then simply clamp the barrel and turn the receiver part.
Barrel or receiver or both.
Sights, barrel and bedding.
The receiver is the frame of a firearm- in modern firearms, it is the part that the barrel connects to. Antique firearms, such as muzzle loading rifles, did not have a receiver- only the lock, stock, and barrel. (Yes, that is where the expression came from) On a modern firearm, if it has a serial number, it is stamped on the receiver. By US law, a receiver IS a firearm- everything else is parts.
Well, no.... not if the receiver is chambered for 30-06.