The 1994 GM A Body vehicles with the 3.1 requires 41 to 47 psi for fuel pressure.
The low pressure valve to put in 134a on a 1994 Oldsmobile Cutlass Ciera V6 is on the passenger side of the engine compartment. It is about 12 inches below the alternator.
General rule is that you need 10psi for every 1,000 rpm's of the engine.
4 cylinder - try the front lower section of the engine behind radiator 6 cylinder lower rear section of engine Try to follow + battery cable
The starter on a 1994 Oldsmobile Cutlass Ciera is located on the driver's side of the engine towards the bottom of the engine. It is behind the crankshaft sensor and the fusible links.
It varies by engine.
5w30
On the front of the engine.
Check your cylinder pressure with a compression gauge. The gauge will hook up to your spark plug openings.
Engine end of upper radiator hose
The firing order for a 1986 Oldsmobile Cutlass Ciera 2.8 V6 is 1, 2, 3, 4, 5, 6. The number one cylinder is on the front left as you face the engine compartment.
HeyRyan==It depends on what engine you have. It will be at the rear of the engine on the bottom. Good luck Joe
It will vary depending on the model, but I have a 94 Cutlass Ciera, and it has a 3.2 liter V6 in it