0
What is the function of the spindle of a floor model drill press?
Wiki User
∙ 11y ago
The spindle moves up and down and carries the shaft of the drill inside it. As the drill turns inside the spindle, the spindle can be lowered, bringing the drill bit into contact with the work.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Explain the difference between a floor model drill press and a hand held drill?
A floor model drill press is a very large and versatile machine that can perform many tasks and hold many different tools. A hand held drill is smaller and basically just for drilling holes.
What are the different parts and there function of bench drill press?
A vertical drill press is a large drilling machine that stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
What is the different parts of a drill press?
A drill press is a large drilling machine that stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
What is a vertical drill press?
A vertical drill press is a large drilling machine that stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
What does a predastel drill do?
You mean a PEDESTAL drill.A vertical or pedestal drill press is a large drilling machine that stands on a very heavy steel base. A 3" or 4"steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
What is a vertical drill?
A vertical drill press is a large drilling machine that stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
How much drill press coast?
Anywhere from $79 for a small benchtop model to over $500 for a good workshop floor model. Professional ones much higher.
What does a drill press looks like?
A drill press is a large drilling machine that stands on a very heavy steel base. A 3" or 4" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it and a drill chuck on the lower end. In the middle of the column, a steel table, usually about 15 " square can move up and down the column to adjust work height.
What are benc drills?
You must mean 'bench' drills. -A Bench drill or more correctly, vertical drill press, is a large drilling machine that stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height
How many pieces are there on a drill press?
A drill press is a large drilling machine that has many pieces. - It stands on a very heavy steel base. A 3" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height. This table often has clamps to hold work, or even a flat vice. I can't even begin to count all the pieces, but well over 300.
What is a drilling press?
A vertical drill press is a large drilling machine that stands on a very heavy steel base. A 3" or 4" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever. lowering or raising the drill shaft and chuck, A belt between the 2 pulleys drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height.
The parts of a lathe machine?
A 'pillar drill' or vertical drill press is a large drilling machine that stands on a very heavy steel base. A 3" or 4" steel column extends up either about 6 feet for a floor model or 3 for a bench model. At the top of this column is an elongated box with the motor at the back, driving a shaft with a 4 tier pulley above it. The front of the box contains a hollow shaft with a spindle inside it. The spindle also has a 4 tier pulley on top. The hollow shaft can be wound up and down by the side control lever, l owering or raising the drill shaft and chuck, A belt between the 2 pulleys in the box drives the spindle and the chuck connected to it's lower end. In the middle of the column, a table, usually about 15 " square can move up and down the column to adjust work height
