Thay are all different. But if you look at the back of it you will see where it's stamped into the rotor.
It is stamped into the rotor. You will have to remove it to be able to read it.
The minimum thickness for the rotors on an 05 Chevy Equinox is between 0.6 and 0.9 inches. This is the width or thickness of the rotor measured at its thinnest point.
Minimum thickness is stamped into the rotor. Use a wire brush to remove the rust buildup and you'll see the spec.
2004 ford explorer minimum rotor thickness
Front Rotor Minimum Thickness after machining the rotor is .996
The 2001 Pontiac Grand Am minimum brake rotor thickness is .075. The minimum brake rotor thickness is a standard minimum. Certified mechanics cannot use the brake rotor when the thickness drops below this level.
The minimum thickness should be cast somewhere on the rotor.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
Thea minimum thickness for a 1996 Toyota Corolla rotor is .787, measured in In thousandths of an inch. Anything rotor that does not meet this minimum thickness should be discarded.
The minimum thickness is cast into the rotor, either on the edge of the rotor or into the rotor hub.
I use a micrometer the rotor should have minimum thickness stamped on the rotor is inches or millimeters
Minimum thickness is .8898 in.