If it's the 2.2 litre engine like my girlfriend's 1995 L (In North America the 95-99 are the same generation II models) then Advance Auto parts computer indicates the correct gaping is .044
The spark plug gap for a 1995 Subaru Legacy is .044"
The spark plug gap for a 1998 Subaru Impreza/Legacy with the 2.5L DOHC engine is .044".
If you have no spark on the 1991 Subaru Legacy, you should check the spark plugs and spark plug wires for replacement. You should also check the battery and ignition for replacement.
No there is not.
The gap on mine is .044. Its a 1990 Legacy. If this is not right somebody let me know.
Well... Hopefully, for your sake..there isn't any *It will cause a massive explosion*
Go to ScoobyMods.com ScoobyMods > Modifications > Legacy > Performance > Spark Plug Change For The H6 (6 cyl) Motor. Need a six-pack & a lot of PATIENCE...
The spark plug gap, for your 2000 Subaru 2.5 liter engine, is .007. Most spark plugs will be pre-gapped by the spark plug manufacturer.
SPARK PLUG GAP1999 Subaru Truck Forester AWD 2.5L MFI 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
The standard spark plug gap for a 1996 Subaru Impreza 2.2 L is 0.040. The gap is the distance between the tip of the spark plug and the electrode inside.
Spark plug gap according to Champion Spark Plug applications list is .044
The spark plug gap for a 2007 Subaru Outback Touring Edition should be set at 1.016 mm. This is equal to .040 inches. A new spark plug will come pregapped and does not need to be adjusted any further.
Follow any of the spark plug wires from the spark plug to the top of the engine and they all will meet at the coil pack
The plug gap should be 0.044. I found that answer here: http://www.intakeone.com/Subaru_intake/subaru_NGKplugs.html Good luck.
Should be a plug at the bottom or rear of radiator
If it is an automatic transmission, plug is on pan, 17mm bolt on left side of pan.
They Should come Pre-gapped in the box. If you dropped one or something, measure one of the others from the box.
For the non-turbo charged engine the specified spark plug gap is .039 to .043 inches.
Generally, to replace spark plugs on a Subaru vehicle, the spark plug boot should be removed. Then, the old spark plugs should be removed using a socket wrench, and replaced with new ones.
Usually 5/8 inch spark plug socket.
You have a four-cylinder engine with one spark plug in each cylinder.