The firing order is 1, 8, 4, 3, 6, 5, 7, 2. Cylinders are numbered front to back passengers side 2, 4, 6, 8. Drivers side front to back 1, 3, 5, 7. Distributor rotation, clockwise.
1 8 6 3 4 5 7 2 good luck.
Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?
bad spark plug wire.
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
1993 Ford Escort 1.9 Liter Engine Spark Plug to Distributor Cap Wire Order: Looking at the engine from the front of the car, the distributor cap is to the right of the engine (or on the driver's side of the car looking from the front of the car. The spark plug wires come from each spark plug and terminate on the distributor cap. They plug in to the distributor cap. Looking at the engine from the front of the car, the spark plugs (left to right) are identified as spark plug "A", spark plug "B", spark plug "C" and spark plug "D". "A" wire comes from the "A" spark plug to the 4th (right most) hole on the distributor cap; "B" wire comes from the "B" spark plug to the 3rd (2nd right most) hole on the distributor cap; "C" wire comes from the "C" spark plug to the 2nd (left most) hole on the distributor cap and the "D" wire comes from the "D" spark plug to the left most hole on the distributor cap.
There is no specific order that you have to follow to replace the spark plug wires. My advice is to replace each wire one at a time in order to not get confused which is easy to do. Just remove one wire, get a new wire the same length and replace that wire. Then move to the next wire.
Remove the spark plug wire caps from the spark plugs. Remove the spark plugs by turning them to the left with a 5/8 deep well socket.
The rubber end on the spark plug wire.
no it can not start with a broken spark plug wire unless you fix it
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.
In order to change the spark plug wires in a Toro lawn mower, the engine housing should be removed. The spark plug wire will then be disconnected which is a simple twisting movement under pressure. This is a very quick procedure.
on the left front of the engine the order is 1 2 3 and on the right front it is 4 5 6 and from across it is 1 4 2 5 3 6