17 ft.lbs.
The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound intervals.
what is the torque on 2.2 rocker arms and in what order
Rocker studs lubricated with oil, 50 ft/lbs. Valve covers 3 lb/ft.
For the 1989 Chevy S-10 with the 2.5 liter engine, the torque setting for the rocker arm bolt is 22 ft. lbs. The torque setting for the rocker arm cover is 75-inch lbs.
22 ft. lbs.
There are no torque specs for a 350 Chevy. Follow the valve adjustment instructions in any repair manual for any small block Chevy.
No, head bolt torque is much higher than rocker arms.
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.
i need to know what the torque specs are on the rocker arms for a 97 Chevy lumina, 3.1L v6
Very hard to tell without removing a head, but if it has the factory intake and rocker covers the 307 would have an oil fill tube sticking up near the front of the intake with no fill plugs or cap in the rocker covers.
The correct torque for the rocker arm bolt is 14 N·m (124 lb in) plus 30 degrees.
Rocker arms are set to a specific preload or backlash on v8 Chevies. There is no torque specification.