Want this question answered?
4cylinder 105-112 foot pounds v-6 65 foot pounds
35 ft pounds
20 ft lbs
The 1994 Nissan Pathfinder had bolt torque specification is 140 pounds. There is not any removal sequence. There is only a sequence to put the bolts in.
Torque settings on 1300 Toyota Tazz are torque to 59 foot-pounds, loosen one full-turn. Then, torque 37 foot-pounds and 68 foot-pounds. Torque sequence is 6, 4, 2, 8,7, 3, 1, 5.
35 foot pounds
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
The torque spec is 89 in-lbs not ft lbs. Tighten in sequence from the inside out.
== 12-16 Foot pounds (Final torque) Note: to torque bolts & nuts, start in center using crisscross pattern working outward The Head Bolt Torque 65-72 Foot pounds (Final torque) Torque sequence ------------ front | 9 5 1 3 7 | of | 10 6 2 4 8 | engine ------------ Final torque must be reached in 3 equal steps Recheck final torque in sequence The Intake Bolt Torque 23-25 Foot pounds (Final torque) Torque bolts & nuts in numbered sequence --------------- | 5 1 9 11 3 7 | | 6 4 12 10 2 8 | --------------- The Main Bearing Cap Torque 60-70 Foot pounds (Final torque) The Main Bearing Cap Torque 60-70 Foot pounds (Final torque) The Rod Bearing Cap Torque 19-24 Foot pounds (Final torque)
17 pounds
Folowing torque sequence its 10 to 15 foot pounds then 17 to 19 foot pounds then each nut a full quarter turn.
There is no set torque sequence. Usually, starting with the bolt at the 12 o'clock position, then move to the 6 o'clock, then 3, then 9. Then move to 1, 7, 4, 10, and continue in a clockwise manner until 12 o'clock is reached again. The torque amount for a Silverado is 44 inch pounds on first torque, and?æ89 inch pounds the second time.