0
Voltage regulation is just the percentage change in voltage at the receiving/sending end of the transmission line from no load to full load.
It is given by ((Vnl-Vfl)/(Vnl)) X 100%. Typically Voltage at receiving end is known to us and for the sending end Vnl is given by Vs/A. Where A is given by the ABCD parameters of the transmission line and Vs = AVr + BIr.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Define voltage regulation and efficiency of a short transmission line?
Voltage Regulationvoltage regulation of a line is defined as the change in voltage at the receiving end when full load at a given power factor is removed, the voltage at the sending end being kept constant. it is expressed as a fraction or a percentage of the receiving end voltage at full load. it can be written as, Per unit regulation = Vrnl - Vrfl / VrflPercent regulation = (Vrnl -Vrfl / Vrfl) * 100Efficiency of a Short Transmission LineIt is the ratio of the Power Output of the line to the Power Input of the line.
What is line regulation?
Line regulation is a measure of the ability of the power supply to maintain its output voltage given changes in the input line voltage. Line regulation is expressed as percent of change in the output voltage relative to the change in the input line voltage.
What is regulation of a transmission line?
Regulation has to do with keeping the voltage at a desired value. This is often put in a per unit value, which you can think of as a percent of nominal. So if the desired voltage is 34.5kV, and the actual voltage is 33.8kV, the voltage is .98 per unit. There are regional and national rules on how low or high voltage can be. If the voltage strayes from this, it must be regulated back to an acceptable value.
Is transmission voltage a phase to phase voltage or a phase to ground voltage?
Phase to Phase voltageCorrection to the above answer:There is no such thing as a 'phase-to-phase' or 'phase-to-ground' voltage. The correct terms are 'line-to-line' (or 'line voltage') and 'line-to-ground' (or 'phase voltage'). Transmission-line voltages are line-to-line (or 'line') voltages.
How the voltage regulation in 33kv line?
It does not depend on the line. The regulation is the percentage change in voltage caused by applying the full load current, and that depends on the transformer supplying the line. A value of 5% would be typical.
Line regulation and load regulation of zener diode?
Line regulation defines as the output voltage of the zener to remain constant under input line variation. Load regulations defined as the load increases or decreases the zener will control this variation by keeping the voltage constant.
How many max transmission voltage in India?
There are three types of transmission lines of India given follows ---- 1-long transmission line( which is used grid to power suppliers plant ) 2-medium transmission line ( which is used power supplier plant to the industry ) 3- short transmission line ( which is used transformer to the consumers )
What is line in line regulation?
Line refers to the a.c. supply line. Line regulation is the change in output of a device, usually a power supply, which is due to variations in the voltage of the a.c. supply.
What is the line voltage of a 230000 kv transmission line?
Transmission and distribution voltages are normally expressed in terms of line voltages, so the answer is that the figure you quote is a line voltage. Incidentally, do you really mean 230 megavolts for a transmission voltage?? And the symbol of kilovolt is 'kV', not 'kv'.
What is low voltage ic 723 regulator?
ic voltage regulator is good for line or load regulation
What does inductive load effect on High Voltage transmission line?
the inductive load which is generally use in high voltage transmission line known as transformer. the transformer transform the high voltage to low voltage.
High voltage transmission line in India?
ge transmission in india
